Products
[ Dryer SV Mk.II ]

Volume: from 650 - 8000L
Max. temp. 300°C

The SV Mk.II chamber dryer with internal air circulation is suitable for a wide range of production processes (drying, hardening, preheating, vulcanisation, artificial ageing of aluminium, etc.). They are characterised by the very precise distribution of temperatures in the furnace and rapid temperature increase while maintaining extremely low power consumption. The SV Mk.II chamber dryer also has a stainless muffle with muffle with high mechanical and corrosion resistance. The wide range of custom modifications, very short delivery period, and quick supply of spare parts are additional benefits of this line.

Application:

  • Drying
  • Vulcanisation
  • Surface finish hardening
  • Drying of granulate
  • Burning-in of electrical components
  • Preheating of various materials before the next processing
  • Preheating reusable moulds and semi-finished products
  • Artificial ageing of aluminium and its alloys
  • Low-temperature tempering
  • Drying of moulds and cores
  • Tempering of rubber and electric components
  • Firing (of e.g. insulation paints)
  • Elimination of acid brittleness

Benefits:
The SV MK.II’s furnace chamber has a built-in sheet metal muffle designed for long-term service life. This muffle provides mechanical durability and resistance to corrosion. Its horizontal internal atmosphere circulation with air circulation up to 50 times/min (SV 1501/30 Mk.II, . This )ensures the uniform distribution of temperature in the furnace interior . The furnace fan and heating basket are built into the ceiling to save installation space. and allow for convenient maintenance access.


Standard equipment of the dryer includes:

  • Ht40P controller (10 programmes with 15 steps each)
  • Resistance heating (heating elements)
  • Bottom modification for trolley or smooth bottom
  • Safety handle to prevent user becoming trapped in the furnace’s operational space
  • Thermostat (used as a limit unit)
  • Manually controlled ventilation flap
  • Manually controlled suction flap
  • “N” type thermocouple
  • Contactless switching relay for noise-free operation
  • Door limit switch for the safe opening of the furnace
  • One-wing door manually opened to the right (for volumes up to 4,000 l); two-wing door (for volumes over 4,000 l)
  • Switchboard on the left side of the furnace


Optional accessories for extra charge:

  • Ht205 controller (30 programmes with 15 steps each, LAN interface)
  • Ht200 controller (30 programmes with 25 steps each, LAN and USB interface)
  • Automatic ventilation flap for cooling the furnace’s operational space (with Ht205 or Ht200 controller)
  • Automatic suction flap for cooling the furnace’s operational space (with Ht205 or Ht200 controller)
  • Exhaust fan for cooling and exhaust of flue gases (with Ht205 or Ht200 controller)
  • Controlled pressure forced cooling (with Ht205 or Ht200 controller)
  • Uncontrolled pressure forced cooling (with Ht205 or Ht200 controller)
  • Modification for the rubber industry (muffle sealing, exhaust fan)
  • Optimisation of the temperature field to meet DIN 17052-01-ΔT 4 °C standard in the internal usable chamber space (in empty furnace at Tmax), this applies to dryers with the maximum capacity of 6,000 litres (addition of grommet for TUS test and measuring loop calibration necessary)
  • Measurement protocol for temperature uniformity (grommet is needed for the TUS test
  • Measuring loop calibration
  • Grommet for TUS test measuring thermocouples
  • RS232 or EIA485 interface
  • HtMonit set (software + interface)
  • Three-channel digital graphic temperature recorder
  • Ammeters for checking the status of heating elements
  • Charging trolley with shelves of a steel construction for use up to 250 °C (only up to 4,500l volume)
  • Loading frame with 4 shelves made of constructional steel (only up to 4,500l volume)


Custom accessories:

  • Drive-up ramp
  • Second door (furnace entry chamber)
  • Relative humidity measurement
  • METREX gas analyser (with Ht205 or Ht200 controller)
  • Door inspection window with illumination
  • Limit switch on trolley
  • Electromechanical door lock (with Ht205 or Ht200 controller)
  • Meeting AMS 2750E/CQi-9 with the TUS protocol
  • Door opening hydraulically upwards
  • Stainless steel muffle

Common combinations of optional accessories:

  • Controlled/uncontrolled pressure forced cooling
  • Automatic ventilation flap
  • Automatic suction flap
  • Ht205 or Ht200 controller
  • Exhaust fan
  • Exhaust fan for drawing off flue gases
  • Automatic ventilation flap
  • Automatic suction flap
  • Ht205 or Ht200 controller


Furnace modification for the rubber industry is also available for use at maximum temperature 250 °C. This modification includes the following:

  • Exhaust air quantity 500-1,000 m3/h with slight vacuum in the chamber. Quantity is based on furnace capacity (e.g. for SV 3300/250 there will be exhaust of 700 m3/h),
  • Fan exhaust with tilt away from the fan for draining condensate (output drain connection pipe not included)
  • Opening at the lowest point in the exhaust for connection of means to draw off condensate
  • Automatic ventilation flap
  • Automatic suction flap
  • Muffle sealing
  • Exhaustion fan
  • Ht205 or Ht200 controller

 Warranty: 24 months                                                                                                                                                         

order no. LAC type Tmax capacity internal dimensions (wxhxd) external dimensions* (wxhxd) heating power input weight voltage protection
    °C l mm mm kW kg V  
1006090 SV 650/30 Mk.II 300 650 1,800x1,750x1,200 1,000x800x800 12 610 400 25/3
1006092 SV 1001/30 Mk.II 300 1,000 1,800x2,150x1,200 1,000x1,200x800 12 715 400 25/3
1006093 SV 1002/30 Mk.II 300 1,000 1,800x1,950x1,400 1,000x1,000x1,000 12 760 400 25/3
1006094 SV 1501/30 Mk.II 300 1,500 1,800x2,750x1,200 1,000x1,800x800 18 870 400 40/3
1006095 SV 1502/30 Mk.II 300 1,500 1,800x2,050x1,800 1,000x1,100x1,400 18 990 400 40/3
1006096 SV 1700/30 Mk.II 300 1,700 1,800x2,650x1,400 1,000x1,700x1,000 24 970 400 50/3
1006097 SV 2400/30 Mk.II 300 2,400 1,800x2,650x1,800 1,000x1,700x1,400 24 1,200 400 50/3
1006098 SV 3001/30 Mk.II 300 3,000 1,800x3,150x1,800 1,000x2,200x1,400 24 1,400 400 50/3
1006099 SV 3002/30 Mk.II 300 3,000 1,800x2,650x2,200 1,000x1,700x1,800 24 1,450 400 50/3
1006100 SV 3300/30 Mk.II 300 3,300 1,900x2,950x1,900 1,100x2,000x1,500 24 1,450 400 50/3
1006101 SV 4000/30 Mk.II 300 4,000 2,000x2,950x2,000 1,200x2,000x1,600 30 1,550 400 63/3
1006102 SV 4500/30 Mk.II 300 4,500 2,800x2,150x2,300 2,000x1,200x1,900 36 1,800 400 80/3
1006103 SV 5000/30 Mk.II 300 5,000 2,500x2,650x2,100 1,700x1,700x1,700 48 1,750 400 100/3
1006104 SV 6001/30 Mk.II 300 6,000 2,700x3,150x1,800 1,900x2,200x1,400 58 1,850 400 125/3
1006105 SV 6002/30 Mk.II 300 6,000 2,800x2,450x2,400 2,000x1,500x2,000 58 2,050 400 125/3
1006107 SV 8000/30 Mk.II 300 8,000 2,800x2,950x2,400 2,000x2,000x2,000 72  2,300 400 160/3

 


    
LAC Asia Limited Nathan Commercial Building 8-A 430-436 Nathan Road Yaumatai, Kowloon, Hong Kong
E-mail: lac.asia@yahoo.com  sales@lacasia.net  Tel: +852 8192 9862